PPGI Profiled Sheet: Order by Profile Drawing
ZIVO STEEL sources PPGI profiled sheet from partner suppliers order by order. Use this page to specify what you need before a quotation.
Send the profile drawing
Start with the finished PPGI profile drawing. Name the pitch, depth, crest and valley shape, lap direction, edge detail and revision, then give the effective cover width required by the installed layout. Overall sheet width and cover width are different; a generic corrugated label cannot establish that your panels will fit. ZIVO sources profiled sheets through partner suppliers for each order and must check the actual drawing and forming route. It does not claim an owned profiling line or a catalogue profile that automatically fits your project.
Define finished sheet quantity
Specify the galvanized zinc-coated steel substrate, grade and metallic-coating designation for the PPGI profiled sheet. Then confirm whether the partner will form the profile from prepainted feedstock and which material standard and edition it proposes. The base and organic paint are separate requirements; do not borrow a PPGL substrate line or an unpainted aluminium-zinc row. Send the intended exposure and fixing context so the partner can assess the proposed material and forming conditions, without implying a structural or roof-system guarantee.
Profile drawing and geometry
State the required profile drawing and geometry and how it will be verified for this order.
Effective cover width versus feed width
State the required effective cover width versus feed width and how it will be verified for this order.
Finished length and sheet count
State the required finished length and sheet count and how it will be verified for this order.
Ppgi substrate and paint
State the required ppgi substrate and paint and how it will be verified for this order.
Specify substrate and coating
State the paint system on the weather-facing and reverse faces, the controlled color sample, gloss and any protective film. Forming can stress the visible coating at bends; agree any flexibility or appearance check with the actual supplier and product. If adjacent panels must match, record the sample and batch approach before production. A digital color image or another seller's chart does not define the finished PPGI roof panel you will receive.
- Ppgi substrate and paintState the required ppgi substrate and paint and how it will be verified for this order.
- Visible face and colorState the required visible face and color and how it will be verified for this order.
- Stacking, protection and receiptState the required stacking, protection and receipt and how it will be verified for this order.
Approve appearance and packing
Give finished PPGI profile length, piece count by length, bundle size and stacking direction. Ask how the face, edges and profile crests will be protected during handling and transport, and how each bundle will be marked with the drawing revision and lot. The order should distinguish the parent-coil document from finished-profile geometry and condition. ZIVO confirms packaging and marking through its partner for the actual shipment rather than promising one standard pack.
Agree receipt checks
At receipt, compare the delivered PPGI profile against the drawing, effective cover width, length and count. Inspect the visible paint, cut edges, bundle labels and any moisture or transit damage before installation. Preserve photos and the agreed sample if there is a mismatch. Send the drawing, substrate and paint requirements, color sample, quantity and destination to ZIVO for an order-specific partner check; this material page does not certify wind, water-tightness or service life of a complete roof system.
Send the order basis
Include use, drawing, form and material system.
Confirm the offer
Check each proposed difference, test and delivery term.
Keep the receipt record
Match labels, documents and visible condition to the agreed order.
Tell Us What You Need
Send the product form, grade, finish, thickness, width, length and quantity. Inquiries are answered within 2 hours.
Send your coated-steel enquiry
Share the drawing, material system, quantities and the documents you need. ZIVO will check the route for your order.
- Email: henry@zivosteel.com
- WhatsApp: +86 15668396618
- Address: 2F, Vanke Center, Lixia District, Jinan, Shandong, China
- Hours: Monday to Saturday, 8:00-18:00 (China time)