PPGI Steel Coil: Specify Substrate, Paint and Delivery
ZIVO STEEL sources PPGI coil from partner suppliers order by order. Use this page to specify what you need before a quotation.
Confirm the galvanized substrate
Start with the steel substrate and the galvanized zinc-coated metallic coating required for this PPGI coil. State the product standard, grade and coating designation on the enquiry rather than assuming the paint color identifies the metal underneath. Ask whether the quoted thickness is measured on the base metal or on the finished coated product. ZIVO can source this form through partner suppliers for an individual order; the exact grade, coating and dimensions need that partner's confirmation. If the specification is for PPGL, use its separate product page and order line.
Specify the organic coating
A PPGI coil order needs an organic-coating specification in addition to its metallic-coated base. Record the primer, visible topcoat and reverse-side coat separately, including which face will be exposed after forming. State a controlled color reference, physical sample and gloss or texture requirement when appearance matters. Ask the supplier to confirm the actual paint system, film measurement and forming suitability against your process; an acronym from a competitor's catalogue does not establish what ZIVO can supply. Keep the sample and lot reference with the order so the received coil can be compared with the agreed finish.
Galvanized substrate standard and grade
State the required galvanized substrate standard and grade and how it will be verified for this order.
Metallic coating designation and basis
State the required metallic coating designation and basis and how it will be verified for this order.
Nominal base-metal versus finished thickness
State the required nominal base-metal versus finished thickness and how it will be verified for this order.
Primer, topcoat and backcoat requirements
State the required primer, topcoat and backcoat requirements and how it will be verified for this order.
Define coil dimensions and winding
Give the required finished width and thickness basis, the inner diameter that your line accepts, maximum coil weight, winding direction, edge condition and quantity. If the coil will be slit or profiled later, include the downstream drawing and any surface-protection limits. The partner may propose a different coil size or packing route; compare that proposal against your line limits before approving it. Do not assume another PPGI listing's range is available for this order.
- Primer, topcoat and backcoat requirementsState the required primer, topcoat and backcoat requirements and how it will be verified for this order.
- Color sample and glossState the required color sample and gloss and how it will be verified for this order.
- Width, id, weight and windingState the required width, id, weight and winding and how it will be verified for this order.
- Documents and inspectionState the required documents and inspection and how it will be verified for this order.
Agree sample and inspection
Agree which documents identify the PPGI substrate and coating lot, which paint sample controls appearance, and where surface, edge and packaging condition will be inspected. A parent-coil record can support material identity but does not prove the performance of a later formed part. If the project requires a bend, film-thickness or other test, name the applicable method and acceptance condition in the order after the supplier confirms it. Keep transit damage evidence separate from a manufacturing nonconformity.
Send a complete PPGI RFQ
Send ZIVO your end use, PPGI substrate standard and grade, metallic-coating designation, base or finished thickness, paint system by face, color sample, width, coil limits, quantity, destination and requested records. ZIVO will check the combination and delivery conditions with a partner supplier before quoting. No stock, fixed lead time, minimum order or automatic color choice is stated on this page.
Send the order basis
Include use, drawing, form and material system.
Confirm the offer
Check each proposed difference, test and delivery term.
Keep the receipt record
Match labels, documents and visible condition to the agreed order.
Tell Us What You Need
Send the product form, grade, finish, thickness, width, length and quantity. Inquiries are answered within 2 hours.
Send your coated-steel enquiry
Share the drawing, material system, quantities and the documents you need. ZIVO will check the route for your order.
- Email: henry@zivosteel.com
- WhatsApp: +86 15668396618
- Address: 2F, Vanke Center, Lixia District, Jinan, Shandong, China
- Hours: Monday to Saturday, 8:00-18:00 (China time)