PPGL Flat Sheet: Order Finished Pieces and Surface
ZIVO STEEL sources PPGL flat sheet from partner suppliers order by order. Use this page to specify what you need before a quotation.
Confirm the delivered flat form
Describe the delivered PPGL flat sheet as finished pieces. Give thickness basis, final width and length, piece count, flatness need and any drawing revision. A master-coil width is not the finished sheet width, and a coil quotation does not settle cutting, stacking or protection of individual sheets. Ask whether the proposed source is cut-to-length feedstock or a separately sourced finished sheet, then verify that route for the order. ZIVO checks the actual piece schedule with a partner supplier rather than publishing a universal sheet range.
Identify the PPGL substrate
Identify the aluminium-zinc-coated substrate beneath the paint and name its material and metallic-coating requirements. Then specify primer, topcoat, backcoat and the visible face. If thickness is critical to the part, distinguish base-metal thickness from the overall painted thickness and agree the measurement method. A PPGL flat-sheet enquiry must not be turned into a bare aluminium-zinc-coated sheet order: the color sample and organic-coating acceptance remain part of the product. Confirm the proposed combination with the partner before approving substitutions or cutting from a different parent coil.
Finished piece dimensions
State the required finished piece dimensions and how it will be verified for this order.
Ppgl substrate identity
State the required ppgl substrate identity and how it will be verified for this order.
Metallic and organic coating requirements
State the required metallic and organic coating requirements and how it will be verified for this order.
Visible face and color sample
State the required visible face and color sample and how it will be verified for this order.
Set paint and appearance terms
For a visible panel, state which side is viewed, the approved color sample, gloss or texture and where blemishes would be unacceptable. Define any protective film, the intended forming operation and whether the finished pieces must remain flat after cutting. Keep the sample and surface criteria with the drawing. A color number alone is useful for initial matching, but it is not a complete receipt condition for a stack of PPGL sheets.
- Visible face and color sampleState the required visible face and color sample and how it will be verified for this order.
- Flatness and protectionState the required flatness and protection and how it will be verified for this order.
- Piece count and documentsState the required piece count and documents and how it will be verified for this order.
Agree protection and marking
For PPGL flat pieces, state how the painted face will be separated in a stack and how each pack identifies its finished dimensions, count and lot. If the partner cuts sheets from a PPGL coil, request the parent-coil substrate and paint record, then check the finished trim, flatness and edge condition separately. An aluminium-zinc substrate document cannot prove that the painted faces survived cutting and transport. Photograph wet wrap, scratched faces or damaged corners before the packs are moved, and compare the labeling and protection with the agreed order.
Send a PPGL sheet RFQ
Send the piece drawing and revision, PPGL substrate and coatings, finished dimensions and quantities, visible-face sample, flatness and protection needs, delivery point and document list. ZIVO will ask a partner supplier to confirm the available source and cut-to-length or finished-sheet route. Do not treat this page as a fixed stock list or a guarantee of a particular paint, color or MOQ.
Send the order basis
Include use, drawing, form and material system.
Confirm the offer
Check each proposed difference, test and delivery term.
Keep the receipt record
Match labels, documents and visible condition to the agreed order.
Tell Us What You Need
Send the product form, grade, finish, thickness, width, length and quantity. Inquiries are answered within 2 hours.
Send your coated-steel enquiry
Share the drawing, material system, quantities and the documents you need. ZIVO will check the route for your order.
- Email: henry@zivosteel.com
- WhatsApp: +86 15668396618
- Address: 2F, Vanke Center, Lixia District, Jinan, Shandong, China
- Hours: Monday to Saturday, 8:00-18:00 (China time)